Beijing CSS Technologies Development Co., Ltd.
Main products:AM System,EM System,RF System,EAS,EAS Tag/Security,EAS Label,AM Alarm System,Magnetic Detacher,EAS DR Label/Eas Consumables,EAS Security System/Anti Theft System
Products
Contact Us
  • Contact Person : Mr. Liu Raymond
  • Company Name : Beijing CSS Technologies Development Co., Ltd.
  • Tel : 86-10-88508024
  • Fax : 86-10-88508024
  • Address : Beijing,Beijing,5th Floor, Block D, Building for Production and R&D,Base of Small & Medium Technology Enterprises,19 Gu Cheng Xi Jie, Shijingshan District,Beijing 100043 China
  • Country/Region : China
  • Zip : 100097

library supply

library supply
Product Detailed
library equipment,ADV series of products are designed for activating and deactivating EM labels and verifying labels status.

library equipment

ADV-8000S is for use independently without being connected with any other equipment. ADV-8000S is triggered by a signal from the IR sensor on the Antenna Pad, not by any other way.

ADV-8000B is for use with barcode scanner to organize a simple workstation. The character of this model is as below.

1 – The unit can be working independently as ADV-8000S or can be connected with barcode scanner and triggered by signal from the barcode scanner generated after successfully reading the information of a barcode on books.

2 – When the unit is connected with a barcode scanner, it will work as below.

(1) When you just power on the unit but have not scanned any barocde successfully, it will work just as an ADV-8000S which will be triggered only by a signal from the IR sensors on the Antenna Pad.

(2) When you have scanned a ID Barcode successfully, the unit will change into another  mode of operation at once, which means that the unit will be triggered only by a signal from the barcode scanner after reading a barcode successfully.

Please note that for this model, the unit will be triggered by any successful reading of barcode information without confirming if the information of a patron card and a book is valid or not.

(3) When you power off the unit and power it on again, it will work again as the modes described as above.

(4) Auto & Manual modes work as usual.

3 – On the Antenna Pad, there is a RS232 port. The barcode scanner is connected to the unit via RS232 port on the Antenna Pad.

4 – The function of Check (for checking active label inside a book) always working independently. When you set the button to Check position, the unit will only detect active label and will not be triggered by signal from IR sensors or barocde scaaner. When you set the button to the Normal position, the unit will work as described above in 1 and 2.

ADV-8000C is for use with a PC server to organize a workstation. The character of this model is as below.

1 – The unit can be working independently as ADV-8000S or can be connected with a PC server and triggered by commands from the PC which are defined by the management software supplier.

library supply



Copyright Notice @ 2008-2012 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.